The machine is a combination of extruder, calender, rewinder and electric control box etc. The drum, screen changer and die head are made of high quality alloyed steel (38 CrMoAIA)with high hardness, strong corrosion resistance and long operating life after nitrogen treatment.The head is adopted hanger-type brach pipe decreasing-styleconstrution. So the flow passage is convenient for solution, and the thickness of products will be smooth and even. The felt wrapped circulation and cooling inside roll and bring a perfect effect. The temperature of die head, mesh changer and the drum separated controlled. all drive system runs synchronously.
Main technical Parameter:
Max. output |
200kg/h |
diameter of screw |
100mm |
thickness of die mouth |
1.5mm |
diameter of roller |
320mm |
adjust distance of roller |
0-30mm |
diameter ratio |
1:30 |
width of die mouth |
850mm |
face length of roller |
1000mm |
No. of roller |
3个 |
motor power of extruder |
55kw |
heating power of drum |
14.8kw |
heating power of die head |
15kw |
heating power of screen changer |
5kw |
motor power of calender |
4kw |
motor power of rewinder |
2.2kw |
air presssure |
0.7mpa |
water consumption |
10m3/h |
air consumption |
0.1m3/h |
sheet thickness range |
0.3-2mm |
Max.width |
700mm |